The Low-Boy is a great stand for getting a 2K head into a tight corner and at a relatively low height.

Low-Roller Stand

Click here to see product image

The Low-Roller is a very common stand used mostly for holding textiles. With a couple of these you can fly a 12' x 12' silk.

Hi-Roller Stand

Click here to see product image

These are wide based units designed for extra stability. Mainly used for exterior work or on stages where you need a hefty stand. They come in several sizes ranging from junior to high to high-high. Some have a grip head, which is a 4-1/2in head with a reciever on the backside that will receive a junior (1-1/8in) pin (Lollipop). The Hi-Roller is a very common stand for holding textiles. With a couple of these you can fly a 20' x 20' silk.

Mombo Combo 4-Rise Stand

Click here to see product image

A stand commonly used for reflectors. It features a three-leg base with a folding brace in each leg. They have a Rocky Mountain leg, a junior reciever, and a baby pin and a 4.5" grip head.

3-Rise Combo Stand

Click here to see product image

A 3-rise version of the above Mombo Combo stand without the grip head. Also commonly used for reflectors. It features a three-leg base with a folding brace in each leg. They have a Rocky Mountain leg, a junior reciever, and a baby pin.

There are 2 through 5 section versions of this stand. These Easy-Lifts are heavy-duty stands and can reach far higher than a Gladiator, but should not be used when exceeding 6 meters.

This stand is designed as a multipurpose support for flags, lighting fixtures, prop stands, and other lighting stands. The legs are staggered in height, allowing them to fit in, around, and under furniture, props, and other lighting stands. A "stair leg", aka rocky mountain leg, permits one leg to be raised so it can rest on an elevated surface. Standard c-stand has: a starting height of 40 inches, two risers, a grip head with an extension arm, and a 5/8in baby pin.

A low-boy stand is a lower version of a combo/light stand. There is a junior receiver (1-1/8in).

A studio overhead grip arm is an overhead C-clamp that terminates in a century-stand-like grip head with an extension arm. It can be clamped onto a pipe or a grid to hold flags, scrims, and other items.

Sandbags are made from canvas or heavy vinyl bags filled with sand or shot. They can come in several sizes, we carry 15lb. and 35lb.